Diese Seite auf Deutsch anzeigen
Display webpage in english
Display webpage in russian
Startpage
Products
About SESP
Contact
Terms
SCoC
Imprint
Certificates
Product search:      Help
 

 

Page: 1 2  

  Sumitube® B2(3x)
  Single Wall Polyolefin, 3:1
Operating Temperature: -55 up to 135°C
 

Technical datasheet

Page 1 of 2

 

CSA C 22.2 No. 198.1: 125°C 600V VW-1 (File No. 033298-0-000)
UL 224 125°C 600V VW-1 (File No. E48762)

Surface: Matt
Marking: None
 Dimensions
 

BEFORE SHRINKAGE

AFTER SHRINKAGE

DELIVERY UNITS

Inner diameter (EID) min.

Inner diameter (RID) max. Wall thickness (RWT) min-max Unit quantity Box quantity

[type]

[mm]

[mm] [mm] [m] [m]
1,5/0,5 1,50 0,50 nom. 0,50 300 900
3/1 3,00 1,00 nom. 0,60 150 900
6/2 6,00 2,00 nom. 0,70 60 300
9/3 9,00 3,00 nom. 0,80 60 300
12/4 12,0 4,00 nom. 0,85 60 300
18/6 18,0 6,00 nom. 1,00 60 180
24/8 24,0 8,00 nom. 1,20 60 180
40/13 40,0 13,0 nom. 1,25 60 180

 Colours & Technical drawing

STANDARD COLOURS

black
 
blue
 
red
 
white
 
yellow
 
 

SPECIAL COLOURS

upon request
 
 

TECHNICAL DRAWING

Click to enlarge

  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-23052022 PM0908



 
  Sumitube® B2(3x)  
  Single Wall Polyolefin, 3:1  

 

Technical datasheet

Page 2 of 2

 

 Technical properties

PHYSICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Longitudinal Change SAE-AS23053 -5% ± 10% -7%
Specific Gravity ASTM D 792 1,34
Tensile Strength ASTM D 638 Min. 10,4 MPa ≥ 12 MPa
Elongation at Break ASTM D 638 Min. 200% ≥ 400 %
Secant Modulus ASTM D 882 Max. 173 MPa 65 MPa


THERMAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Operating Temperature SAE-AS23053 -55 up to 135°C -55 up to 135°C
Min. Shrink Temperature Shrink curve full recovery 90°C
Shrinking starts at Shrink curve 60°C
Heat Shock (250°C x 4h) SAE-AS23053 no crack, flowing or dripping Pass
Elongation after heat ageing (158°C x 168h) SAE-AS23053 Min. 100% ≥ 400%
Cold bend (-55°C x 4h) UL 224 no cracking Pass
Copper Corrosion (158°C x 168h) SAE-AS23053 no corrosion Pass
Stability against copper (158°C x 168h) SAE-AS23053 Elongation: Min. 100% Pass


CHEMICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Flammability UL 224 VW-1 Pass
Water Absorption ASTM D 570 Max. 0,5% 0,25%
Fluid Resistance (after immersion 24°C x 24h) SAE-AS23053 Min. 6,9 MPa (Tensile Strength) 7,25 - 14 MPa
Fungus Resistance SAE-AS23053 ASTM G 21 Pass
Ozone resistance NF F 00-608 No cracking or sweating Pass


ELECTRICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Voltage Rating UL 224 600V
Dielectric Voltage Withstand (2.5kV x 60s) UL 224 no breakdown Pass
Volume Resistivity ASTM D 876 Min. 1014 Ω·cm 3,1 x 1014 Ω·cm
Dielectric Strength ASTM D 876 Min. 19,7 kV/mm ≥ 30 kV/mm


  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-23052022 PM0908