| |
|
|
|
|
|
Page:
1 2 |
|
|
|
Sumitube® FR25(TW) |
|
|
|
Elastomer, 2:1
Operating Temperature: -75 up to 150°C |
|
|
|
ASTM
IEC 60684-3-271 Type D |
|
Surface:
Matt
Marking: None |
 |
|
|
Dimensions |
|
BEFORE SHRINKAGE |
AFTER SHRINKAGE |
DELIVERY UNITS
|
|
Inner diameter
(EID) min. |
Inner diameter
(RID) max. |
Wall thickness
(RWT) min-max |
Unit quantity |
Box quantity |
|
[type] |
[mm] |
[mm] |
[mm] |
[m] |
[m] |
|
3/32 |
2,40 |
1,20 |
0,40 - 0,60 |
150 |
600 |
|
1/8 |
3,20 |
1,60 |
0,40 - 0,60 |
150 |
600 |
|
3/16 |
4,80 |
2,40 |
0,40 - 0,60 |
60 |
300 |
|
1/4 |
6,40 |
3,20 |
0,50 - 0,80 |
60 |
300 |
|
3/8 |
9,50 |
4,80 |
0,50 - 0,80 |
60 |
180 |
|
1/2 |
12,7 |
6,40 |
0,50 - 0,80 |
60 |
180 |
|
3/4 |
19,0 |
9,50 |
0,60 - 0,90 |
30 |
90 |
|
1 |
25,4 |
12,7 |
0,75 - 1,05 |
30 |
90 |
|
1-1/4 |
31,5 |
15,0 |
0,80 - 1,20 |
30 |
90 |
|
1-1/2 |
38,0 |
19,0 |
0,80 - 1,20 |
30 |
60 |
|
2 |
51,0 |
25,4 |
0,90 - 1,40 |
30 |
60 |
|
|
Colours & Technical drawing |
|
|
|
|
SPECIAL COLOURS |
|
upon request |
|
|
|
|
TECHNICAL DRAWING |
|
 |
|
|
| |
©
2009 SUMITOMO
ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary. |
SUMITOMO-G-20032023 PM1010 |
|
|
|
|
Sumitube® FR25(TW) |
|
|
|
Elastomer, 2:1 |
|
|
|
|
|
Technical properties |
|
PHYSICAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Longitudinal Change |
SAE-AS23053 |
± 10% |
Pass |
|
Tensile Strength |
SAE-AS23053 |
Min. 11,7 MPa |
≥ 17 MPa |
|
Elongation at Break |
SAE-AS23053 |
Min. 250% |
≥ 400% |
|
THERMAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Operating Temperature |
SAE-AS23053 |
-75 up to 150°C |
-75 up to 150°C |
|
Min. Shrink Temperature |
Shrink curve |
full recovery |
165°C |
|
Shrinking starts at |
Shrink curve |
|
90°C |
|
Heat Shock (200°C x 4h) |
SAE-AS23053 |
no crack, flowing or dripping |
Pass |
|
Elongation after heat ageing (150°C x 168h) |
SAE-AS23053 |
Min. 200% |
≥ 300% |
|
Tensile strength after heat ageing (150°C x 168h) |
SAE-AS23053 |
Min. 10,4 MPa |
≥ 12 MPa |
|
Cold bend (-75°C x 4h) |
IEC 60684-3-271 |
no cracking |
-75°C x 4h |
|
Copper Corrosion |
SAE-AS23053 |
no corrosion |
Pass |
|
CHEMICAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Flammability |
ASTM D 2671 |
Procedure B |
Pass |
|
Water Absorption |
ASTM D 570 |
Max. 2,0% |
≤ 1,4% |
|
Fluid Resistance (after immersion 24°C x 24h) |
SAE-AS23053
including Diesel fuel |
Min. 10,4 MPa (Tensile Strength) |
≥ 14 MPa |
|
Fluid Resistance (after immersion 24°C x 24h) |
SAE-AS23053
including Diesel fuel |
Min. 200% (Elongation) |
≥ 320% |
|
Fluid Resistance (after immersion 23°C x 24h) |
SAE-AS23053
including Diesel fuel |
Min. 7,9 kV/mm (Dielectric strength) |
≥ 13 kV/mm |
|
Fungus Resistance |
SAE-AS23053 |
ASTM G 21 |
Pass |
|
Ozone resistance |
NF F 00-608 |
No cracking or sweating |
Pass |
|
ELECTRICAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Volume Resistivity |
SAE-AS23053 |
Min. 109 Ω·cm |
≥ 1011 Ω·cm |
|
Dielectric Strength |
SAE-AS23053 |
Min. 11,9 kV/mm |
≥ 18 kV/mm |
| Note: SAE-AMS-DTL 23053/16 does not require thin wall dimensions. For standard dimensions see Sumitube FR25.
Megol Transformer oil (J10) test:
Heat ageing (110°C x 168h) / Immersion.
Tensile Strength after ageing > 10,4 MPa: Passed.
Elongation after ageing: > 200%: Passed |
|
| |
©
2009 SUMITOMO
ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary. |
SUMITOMO-G-20032023 PM1010 |
|
|
|
|
