Diese Seite auf Deutsch anzeigen
Display webpage in english
Display webpage in russian
Startpage
Products
About SESP
Contact
Terms
Imprint
Certificates
Product search:      Help
 

 

Page: 1 2  

  Sumitube® A11
  Single Wall Polyolefin, 2:1
Operating Temperature: -55 up to 105°C
 

Technical datasheet

Page 1 of 2

 

ASTM
JIS C 2133

Surface: Glossy
Marking: None
 Dimensions
 

BEFORE SHRINKAGE

AFTER SHRINKAGE

DELIVERY UNITS *

Inner diameter (EID) min.

Inner diameter (RID) max. Wall thickness (RWT) min-max Unit quantity Box quantity

[type]

[mm]

[mm] [mm] [m] [m]
3/32 2,40 1,20 nom. 0,51 150 900
1/8 3,20 1,60 nom. 0,51 300 900
3/16 4,80 2,40 nom. 0,51 150 600
1/4 6,40 3,20 nom. 0,64 100 300
3/8 9,50 4,80 nom. 0,64 75 375
1/2 12,7 6,40 nom. 0,64 75 375
3/4 19,1 9,50 nom. 0,76 60 300
3/4 over exp. 24,0 9,50 nom. 0,76 75 300
1 25,4 12,7 nom. 0,89 60 300
1 over exp. 27,0 12,7 nom. 0,89 60 300

* Cut lenghts of 1200mm are availabe upon request.
 Colours & Technical drawing

STANDARD COLOURS

clear
 
 

SPECIAL COLOURS

upon request
 
 

TECHNICAL DRAWING

Click to enlarge

  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-25092021



 
  Sumitube® A11  
  Single Wall Polyolefin, 2:1  

 

Technical datasheet

Page 2 of 2

 

 Technical properties

PHYSICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Longitudinal Change JIS C 2133 -5% ± 10% -5%
Specific Gravity ASTM D 792 0,94
Tensile Strength ASTM D 638 Min. 10,4 MPa 23 MPa
Elongation at Break ASTM D 638 Min. 200% ≥ 450%
Secant Modulus ASTM D 882 Max. 173 MPa 75 MPa


THERMAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Operating Temperature Life-Curve -55 up to 105°C -55 up to 105°C
Min. Shrink Temperature Shrink curve full recovery 115°C
Shrinking starts at Shrink curve 75°C
Elongation after heat ageing (136°C x 168h) ASTM D 638 Min. 100% ≥ 440%
Heat Shock (200°C x 4h) SAE-AS23053 no cracking, flowing or dripping Pass
Low temperature flexibility (-55°C x 4h) SAE-AS23053 no cracking Pass


CHEMICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Water Absorption ASTM D 570 0,08%
Fluid Resistance (after immersion 24°C x 24h) SAE-AS23053
Gasoline, Engine Oil SAE 10 W/30 and Brake Fluid Min. 6,9 MPa (Tensile Strength) ≥ 13 MPa
Gasoline, Engine Oil SAE 10 W/30 and Brake Fluid Min. 100% (Elongation) ≥ 100%


ELECTRICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Voltage Rating 600V
Dielectric Voltage Withstand (2.5kV x 60s) UL 224 Pass
Volume Resistivity ASTM D 876 Min. 1016 Ω·cm 5,3 x 1016 Ω·cm
Dielectric Strength ASTM D 876 ≥ 20 kV/mm


  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-25092021