Diese Seite auf Deutsch anzeigen
Display webpage in english
Display webpage in russian
Startpage
Products
About SESP
Contact
Terms
Imprint
Certificates
Product search:      Help
 

 

Page: 1 2  

  Sumitube® K
  Fluoropolymer, 2:1
Operating Temperature: -55 up to 175°C
 

Technical datasheet

Page 1 of 2

 

VG 95343 T 05 F "VG-approved" (VDE V 0341-9005)
VDE-File-No. 088218
CSA C 22.2 No. 198.1: 150°C 600V VW-1 (File No. 033298-0-000)
SAE-AS23053/8
UL 224 150°C 600V VW-1 (File No. E75077)

Surface: Glossy
Marking: None
 Dimensions
 

BEFORE SHRINKAGE

AFTER SHRINKAGE

DELIVERY UNITS *

Inner diameter (EID) min.

Inner diameter (RID) max. Wall thickness (RWT) min-max Unit quantity Box quantity

[type]

[mm]

[mm] [mm] [m] [m]
3/64 1,2 0,6 nom. 0,25 150 900
1/16 1,6 0,8 nom. 0,25 150 900
3/32 2,4 1,2 nom. 0,27 150 900
1/8 3,2 1,6 nom. 0,27 150 600
3/16 4,8 2,4 nom. 0,27 60 600
1/4 6,4 3,2 nom. 0,33 60 300
3/8 9,5 4,75 nom. 0,33 60 300
1/2 12,7 6,4 nom. 0,33 30 300
3/4 19,1 9,5 nom. 0,43 30 180
1 25,4 12,7 nom. 0,48 18 180
1-1/2 38,1 19,1 nom. 0,51 12 180
2 50,8 25,4 nom. 0,51 12 120

* non standard colours are available upon request
 Colours & Technical drawing

STANDARD COLOURS

clear
 
 

SPECIAL COLOURS

upon request
 
 

TECHNICAL DRAWING

Click to enlarge

  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-27022020



 
  Sumitube® K  
  Fluoropolymer, 2:1  

 

Technical datasheet

Page 2 of 2

 

 Technical properties

PHYSICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Longitudinal Change SAE-AS23053 ± 10% -7%
Specific Gravity ASTM D 792 Max. 1,8 1,76
Tensile Strength ASTM D 412 Min. 34,5 MPa ≥ 40 MPa
Elongation at Break ASTM D 412 Min. 150% ≥ 350%
Secant Modulus ASTM D 882 Min. 828 MPa ≥ 840 MPa


THERMAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Operating Temperature VG 95343-5 -55 up to 175°C -55 up to 175°C
Min. Shrink Temperature Shrink curve full recovery 170°C
Shrinking starts at Shrink curve 130°C
Heat Shock (300°C x 4h) SAE-AS23053 no crack, flowing or dripping Pass
Elongation after heat ageing (250°C x 168h) ASTM D 638 Min. 50% ≥ 200%
Low temperature flexibility (-55°C x 4h) SAE-AS23053 no cracking Pass
Copper Corrosion (160°C x 16h) SAE-AS23053 no corrosion Pass
Clarity Stability (175°C x 24h) SAE-AS23053 legible markings Pass


CHEMICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Flammability UL 224 / CSA VW-1 Pass
Water Absorption ASTM D 570 Max. 0,5% ≤ 0,2%
Fluid Resistance SAE-AS23053
Tensile Strength (after immersion 24C x 24h) Min. 34,5 MPa Pass
Dielectric Strength (after immersion 24°C x 24h) 19,7 kV/mm Pass
Fungus Resistance SAE-AS23053 ASTM G 21 Pass


ELECTRICAL PROPERTIES

PROPERTY

TEST METHOD REQUIREMENT TYPICAL VALUE
Voltage Rating UL 224 600 V Pass
Dielectric Voltage Withstand (2,5 kV x 60 s) SAE-AS23053 no breakdown Pass
Volume Resistivity ASTM D 876 Min. 1013 Ohm/cm ≥ 1015 Ohm/cm
Dielectric Strength (> 1/2 inch) SAE-AS23053 Min. 23,6 KV/mm ≥ 30 KV/mm
Dielectric Strength (≤ 1/2 inch) SAE-AS23053 Min 31,5 KV/mm ≥ 35 KV/mm


  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-27022020